MULTIRAIL UNIVERSAL
238,90€
Multirraíl para vehículos de ocio y autocaravanas. Fijación sencilla de toldo y toldo mediante barra de sujeción o ribete.
El Multirail le protege del agua de lluvia que se escurre cuando las ventanillas y puertas laterales están abiertas. El agua se drena hacia adelante y hacia atrás a través del perfil del spoiler. Fácil instalación gracias a los perfiles de spoiler preformados y autoadhesivos. El carril de aluminio ya está perforado. Admite cargas en el techo de hasta 100 kg. Se pega con pegamento especial y se atornilla con tornillos de acero inoxidable. Aluminio anodizado negro. En combinación con una baca convencional, podrá transportar cómodamente mercancías voluminosas, kayaks, bicicletas o tablas de surf. El Multirail también se puede instalar en vehículos con techo para dormir o elevable. Aquí la carga máxima sobre el techo es de 50 kg (aprobada por VW).
Volumen del paquete: Multirail, manual de montaje, certificación TÜV, perfil frontal, perfil trasero, tornillos cabeza cable inoxidable 3.9×16 con cabeza avellanada, tornillos tornillo autoperforantes 3.9×16, funda limpieza 3M y terminales derecho / izquierdo.
Related products
- 949,00€
Its design and appearance are similar to the designs of today’s recreational vehicles and it integrates better on the sides of the vehicle. An optional rail covers the space under the awning. The rail fulfills two functions: you can install a Thule tent or add a Thule LED light. Vertical descent system to unfold the support legs without risk of damaging the vehicle. Quick locking system, easy to use, which simplifies the positioning and adjustment of the support legs. Front profile with drainage system to drain water and dirt, which also makes cleaning easier. A motor can be installed later.
Dimensions: 2,62×2,00cm. Weight: 19kg
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock
- 849,00€
Its design and appearance are similar to the designs of today’s recreational vehicles and it integrates better on the sides of the vehicle. An optional rail covers the space under the awning. The rail fulfills two functions: you can install a Thule tent or add a Thule LED light. Vertical descent system to unfold the support legs without risk of damaging the vehicle. Quick locking system, easy to use, which simplifies the positioning and adjustment of the support legs. Front profile with drainage system to drain water and dirt, which also makes cleaning easier. A motor can be installed later.
Dimensions: 2,32×1,80cm. Weight: 17kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock
- 1.609,00€
Suitable for H2 Ducato, Jumper and Boxer vans from 2007 onwards. Quick and easy assembly, without the need for drilling. Because you can define the angle to your liking, you can open and close the awning even when the van’s sliding door is open. A self-adhesive sealing strip is included to close the gap under the awning and prevent water from entering. Only available in the Mystic Gray finish.
Dimensions: 4,00×2,50m. Weight: 30.5kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock
- 1.629,00€
Awning with 2.75 m outlet to expand the space and protect from the sun and rain. Possibility of installing a 230 V motor with remote control. Quick locking system, easy to use, which simplifies the positioning and adjustment of the support legs. In the retractable arms there are channels to place 12 V cables, the retractable arms come with integrated extensible ones that guarantee the optimal tension of the fabric. The support legs are very easy to put on the special supports on the side wall. Front profile with drainage system to drain water and dirt, which makes cleaning easier. Dimensions: 4,50 × 2,75cm. Weight: 44.60kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock
Awning of reduced section to be able to integrate it in the gauge of the central part. Thanks to the technical solutions adopted, it has been possible to better compact the awning gauge, and the innovations introduced, such as the standard LED guide, either on the front or on the frame in addition to the 3 guides on the front, make the F80s a Ideal choice for any type of ceiling installation.
Dimensions: 400x388x250cm. Weight: 34kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock
The F80 S roof awning integrates seamlessly into the vehicle, with its greatly reduced cross section, this awning adapts even better to the shape of the vehicle. Assembly is done on the roof of the vehicle, this requires assembly adapters (Not Included). Optionally, the awning can be equipped with a 12V motor. The awning can also be expanded with suitable fronts and sides.
Dimensions: 370x358x250cm. Weight: 32kg.
CHECK AVAILABILITY
FREE PLACEMENT IN STORE
AVAILABILITY: In stock
Awning of reduced section to be able to integrate it in the gauge of the central part. Thanks to the technical solutions adopted, it has been possible to better compact the awning gauge, and the innovations introduced, such as the standard LED guide, either on the front or on the frame in addition to the 3 guides on the front, make the F80s a Ideal choice for any type of ceiling installation.
Dimensions: 370x358x250cm. Weight: 32kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock
- 1.565,00€
Bigger and more stable aluminum casing with double tubular rail. Opening and closing with crank, without slipping, secure hook on / off, multi-layer fabric, waterproof and resistant to UV rays. Dimensions: 490x470x250cm. Weight: 44kg.
CHECK AVAILABILITY
FREE PLACEMENT IN STORE
AVAILABILITY: In stock
