AWNING F45L FIAMMA
Extra strong lightweight aluminum housing with double tubular rail. Small and narrow housing dimensions with robust aluminum end caps. Large shade surface, fabric with diffused light distribution. Vinyl fabric printed on both sides with anti-slip layer as a protective sheet. Adjustment system for closing the front panel. Auto-Lock security mechanism with self-locking. Support feet integrated into the front panel. With standard adapter kit for side panel. Housing available in Polar White or Titanium, Deluxe Gray or Blue Ocean fabric color. For awnings of 4.5 meters and 5.0 meters, an L beam is included, for awnings of more than 5.5 meters, 2 L beams. Dimensions: 552x535x250cm. Weight: 46.5kg.
CHECK AVAILABILITY
FREE PLACEMENT IN STORE
Related products
- 586,00€
Fiamma F35pro is the practical manual awning with legs integrated in the roller, it can be installed in any type of van thanks to the different models of supports that are attached to the walls, roof bars or guide. It can be installed with optional brackets that are attached to the vehicle wall or roof bars. The awning can be placed directly on the caravan guide without additional supports, locking it with a security screw.
Dimensions: 273x254x225cm. Max height: 225cm. Weight: 13kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock
Awning with the largest frame and extra-long roller, ideal for large motorhomes. Renewed aesthetics, modern design and new technical improvements make this awning increasingly functional and advanced. Ideal for motorhomes and vans. Windlass drive. Opening and closing with a crank. Optional electric motor.
Dimensions: Awning length (A): 502 Canvas Length (B): 485 Extension (C): 250 Weight: 39 Kgs. CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock
Electronic awning 12 V to guarantee maximum comfort, it is easily actuated by pressing the wall button. Innovative wind sensor system that is automatically activated by starting the 12V motor and reclosing the awning in strong winds, preventing the awning from being damaged. Manual opening always available in case of emergency. The self-supporting arms are reinforced thanks to the innovative and solid duralumin block that does not require the use of vertical supports. The angle of inclination of the arms is fixed at 10 degrees, but it can be varied according to the height of the vehicle from 5 ° to 17 °, to allow the correct flow of water.
Dimensions: 366x355x250cm. Weight: 33.5kg.
Housing color: Polar White or Royal Grey.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock
- 582,00€
Fiamma F35pro is the practical manual awning with legs integrated in the roller, it can be installed on any type of van thanks to the different models of supports that are attached to the walls, roof bars or guide. It can be installed with optional brackets that are attached to the vehicle wall or roof bars. The awning can also be placed directly on the caravan guide without additional supports, locking it with a security screw.
Dimensions: 253x232x225cm. Max height: 225cm. Weight: 11.5kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock
- 115,00€
Self-priming pump. Head up to 3 m. The integrated stainless steel filter protects against contamination and guarantees a long service life. Automatic pressure switch. It runs dry.
Connection 10 mm.
7L capacity.
AVAILABILITY: Out of stock
- 38,00€
Fiamma expansion vessel. Preset pressure to 0.9 bar, which can be increased with a compressor. Connection for 10-12mm hose.
Dimensions: H234 x W154 x D98mm
AVAILABILITY: In stock
The F80 S roof awning integrates seamlessly into the vehicle, with its greatly reduced cross section, this awning adapts even better to the shape of the vehicle. Assembly is done on the roof of the vehicle, this requires assembly adapters (Not Included). Optionally, the awning can be equipped with a 12V motor. The awning can also be expanded with suitable fronts and sides.
Dimensions: 370x358x250cm. Weight: 32kg.
CHECK AVAILABILITY
FREE PLACEMENT IN STORE
AVAILABILITY: In stock
- 908,00€
THE CLASSIC AND COMPACT WALL INSTALLATION AWNING FOR PSA VANS. Specific installation brackets for PSA minivan. Also suitable for vehicles with a lifting roof. It integrates perfectly into the vehicle. The installation does not require additional gutters or operations inside the vehicle.
Dimensions: 263x247x250cm. Weight: 19.5kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock
