Awning of reduced section to be able to integrate it in the gauge of the central part. Thanks to the technical solutions adopted, it has been possible to better compact the awning gauge, and the innovations introduced, such as the standard LED guide, either on the front or on the frame in addition to the 3 guides on the front, make the F80s a Ideal choice for any type of ceiling installation.

Dimensions: 400x388x250cm.    Weight: 34kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

THE CLASSIC AND COMPACT WALL INSTALLATION AWNING FOR PSA VANS. Specific installation brackets for PSA minivan. Also suitable for vehicles with a lifting roof. It integrates perfectly into the vehicle. The installation does not require additional gutters or operations inside the vehicle.

Dimensions: 263x247x250cm.    Weight: 19.5kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

The classic and compact wall installation awning for PSA Vans. Specific installation brackets for PSA minivan. Also suitable for vehicles with a lifting roof. It integrates perfectly into the vehicle. The installation does not require additional gutters or operations inside the vehicle.

Dimensions: 263x247x250cm.    Weight: 19.5kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

Self-priming pump. Head up to 3 m. The integrated stainless steel filter protects against contamination and guarantees a long service life. Automatic pressure switch. It runs dry.

Connection 10 mm.

10L capacity.

Refined design and quality components for a structurally solid, comfortable and elegant awning while remaining light and practical. The F70 awning is a good choice for its reliability and innovation characteristics. The frame is in a single piece for greater solidity, monobloc roller support and top tangent opening. The only awning for campers with three guides on the front cover. Windlass drive. Opening and closing with a crank.

Dimensions: Awning length (A): 448 Canvas Length (B): 431 Extension: 250cm. Weight: 32.3kg. Fabric color: Royal Gray or Royal Blue.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

Fiamma F35pro is the practical manual awning with legs integrated in the roller, it can be installed in any type of van thanks to the different models of supports that are attached to the walls, roof bars or guide. It can be installed with optional brackets that are attached to the vehicle wall or roof bars. The awning can be placed directly on the caravan guide without additional supports, locking it with a security screw.

Dimensions: 273x254x225cm. Max height: 225cm.   Weight: 13kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

12 V electric awning for maximum comfort and safety, easily actuated by pressing the wall button. Manual opening in case of emergency. The self-supporting arms are reinforced thanks to the innovative and solid double block duralumin block that does not require the use of vertical supports. The angle of inclination of the arms is fixed at 10 degrees, but it can be varied according to the height of the vehicle from 5 ° to 17 °, to allow the correct flow of water.

Dimensions: 370x335x250cm.    Weight: 34kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

Electronic awning 12 V to guarantee maximum comfort, it is easily actuated by pressing the wall button. Innovative wind sensor system that is automatically activated by starting the 12V motor and reclosing the awning in strong winds, preventing the awning from being damaged. Manual opening always available in case of emergency. The self-supporting arms are reinforced thanks to the innovative and solid duralumin block that does not require the use of vertical supports. The angle of inclination of the arms is fixed at 10 degrees, but it can be varied according to the height of the vehicle from 5 ° to 17 °, to allow the correct flow of water.

Dimensions: 366x355x250cm.    Weight: 33.5kg.

Housing color: Polar White or Royal Grey.

CHECK AVAILABILITY

FREE STORE ASSEMBLY