12 V electric awning for more comfort and safety, it is easily actuated by pressing the wall button. Manual opening available in case of emergency. The self-supporting arms are reinforced thanks to the innovative and solid double block duralumin block that does not require the use of vertical supports. The angle of inclination of the arms is fixed at 10 degrees, but it can be varied according to the height of the vehicle from 5 ° to 17 °, to allow the correct flow of water.

Dimensions: 420x380x250cm.    Weight: 37.5kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

Extra strong lightweight aluminum housing with double tubular rail. Small and narrow housing dimensions with robust aluminum end caps. Large shade surface, fabric with diffused light distribution. Vinyl fabric printed on both sides with anti-slip layer as a protective sheet. Adjustment system for closing the front panel. Auto-Lock security mechanism with self-locking. Support feet integrated into the front panel. With standard adapter kit for side panel. Housing available in Polar White or Titanium, Deluxe Gray or Blue Ocean fabric color. For awnings of 4.5 meters and 5.0 meters, an L beam is included, for awnings of more than 5.5 meters, 2 L beams. Dimensions: 552x535x250cm.   Weight: 46.5kg.

CHECK AVAILABILITY

FREE PLACEMENT IN STORE

Its design and appearance are similar to the designs of today’s recreational vehicles and it integrates better on the sides of the vehicle. An optional rail covers the space under the awning. The rail fulfills two functions: you can install a Thule tent or add a Thule LED light. Vertical descent system to unfold the support legs without risk of damaging the vehicle. Quick locking system, easy to use, which simplifies the positioning and adjustment of the support legs. Front profile with drainage system to drain water and dirt, which also makes cleaning easier. A motor can be installed later.

Dimensions: 3,02×2,50cm.    Weight: 22.60kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

Suitable for H2 Ducato, Jumper and Boxer vans from 2007 onwards. Quick and easy assembly, without the need for drilling. Because you can define the angle to your liking, you can open and close the awning even when the van’s sliding door is open. A self-adhesive sealing strip is included to close the gap under the awning and prevent water from entering. Only available in the Mystic Gray finish.

Dimensions: 4,00×2,50m.    Weight: 30.5kg.

CHECK AVAILABILITY 

FREE STORE ASSEMBLY

Its design and appearance are similar to the designs of today’s recreational vehicles and it integrates better on the sides of the vehicle. An optional rail covers the space under the awning. The rail fulfills two functions: you can install a Thule tent or add a Thule LED light. Vertical descent system to unfold the support legs without risk of damaging the vehicle. Quick locking system, easy to use, which simplifies the positioning and adjustment of the support legs. Front profile with drainage system to drain water and dirt, which also makes cleaning easier. A motor can be installed later.

Dimensions: 1,92×1,40m.    Weight: 14.2kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

With mosquito net and blackout blind. Aluminum coated top reflects solar radiation, protection against black fly plissee. The large glass overhang provides protection from the rain. Convenient installation of the dome with a single bracket. Roof thickness 23-42 mm.

Cutting dimension: 280 x 280 mm.

Free passage light measurement: 238 x 186 mm.

External dimension: 408 x 370 mm.

Outside interior dimension of the frame: 312 x 312 mm.

Inner frame depth: 75mm.

Height above ceiling: 99 mm.

Awning up to 2.50 m out to expand the space, protect from the sun and rain. A 12v motor with manual mechanism allows opening the awning without any effort. Control is exercised with a switch via a tactile command. Weighing an additional 1 kg and an additional 3 cm in length compared to a manual awning. It has a front profile with a drainage system to drain water, dirt and facilitate cleaning.

Dimensions: 3.78 × 2.50cm.    Weight: 29.50 kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

The F80 S roof awning integrates seamlessly into the vehicle, with its greatly reduced cross section, this awning adapts even better to the shape of the vehicle. Assembly is done on the roof of the vehicle, this requires assembly adapters (Not Included). Optionally, the awning can be equipped with a 12V motor. The awning can also be expanded with suitable fronts and sides.

Dimensions: 370x358x250cm.      Weight: 32kg.

CHECK AVAILABILITY

FREE PLACEMENT IN STORE