Awning with 2.75 m outlet to expand the space and protect from the sun and rain. Possibility of installing a 230 V motor with remote control. Quick locking system, easy to use, which simplifies the positioning and adjustment of the support legs. In the retractable arms there are channels to place 12 V cables, the retractable arms come with integrated extensible ones that guarantee the optimal tension of the fabric. The support legs are very easy to put on the special supports on the side wall. Front profile with drainage system to drain water and dirt, which makes cleaning easier. Dimensions: 4,50 × 2,75cm.    Weight: 44.60kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

Awning up to 2.50 m out to expand the space and protect from the sun and rain. Quick locking system, easy to use, which simplifies the positioning and adjustment of the support legs. Because you can define the angle to your liking, you can open and close the awning even when the van’s sliding door is open. Front profile with drainage system to drain water and dirt, which makes cleaning easier.

Dimensions: 4,00×2,50cm.   Weight: 30.50kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

12 V electric awning for more comfort and safety, it is easily actuated by pressing the wall button. Manual opening available in case of emergency. The self-supporting arms are reinforced thanks to the innovative and solid double block duralumin block that does not require the use of vertical supports. The angle of inclination of the arms is fixed at 10 degrees, but it can be varied according to the height of the vehicle from 5 ° to 17 °, to allow the correct flow of water.

Dimensions: 420x380x250cm.    Weight: 37.5kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

Awning up to 2.50 m out to expand the space and protect from the sun and rain. Quick locking system, easy to use, which simplifies the positioning and adjustment of the support legs. Because you can define the angle to your liking, you can open and close the awning even when the van’s sliding door is open. Front profile with drainage system to drain water and dirt, which makes cleaning easier.

Dimensions: 5.00×2.50cm.    Weight: 35.60kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

Suitable for H2 Ducato, Jumper and Boxer vans from 2007 onwards. Quick and easy assembly, without the need for drilling. Because you can define the angle to your liking, you can open and close the awning even when the van’s sliding door is open. A self-adhesive sealing strip is included to close the gap under the awning and prevent water from entering. Only available in the Mystic Gray finish.

Dimensions: 4,00×2,50m.    Weight: 30.5kg.

CHECK AVAILABILITY 

FREE STORE ASSEMBLY

Its design and appearance are similar to the designs of today’s recreational vehicles and it integrates better on the sides of the vehicle. An optional rail covers the space under the awning. The rail fulfills two functions: you can install a Thule tent or add a Thule LED light. Vertical descent system to unfold the support legs without risk of damaging the vehicle. Quick locking system, easy to use, which simplifies the positioning and adjustment of the support legs. Front profile with drainage system to drain water and dirt, which also makes cleaning easier. A motor can be installed later.

Dimensions: 3,02×2,50cm.    Weight: 22.60kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

Its design and appearance are similar to the designs of today’s recreational vehicles and it integrates better on the sides of the vehicle. An optional rail covers the space under the awning. The rail fulfills two functions: you can install a Thule tent or add a Thule LED light. Vertical descent system to unfold the support legs without risk of damaging the vehicle. Quick locking system, easy to use, which simplifies the positioning and adjustment of the support legs. Front profile with drainage system to drain water and dirt, which also makes cleaning easier. A motor can be installed later.

Dimensions: 2,32×1,80cm.    Weight: 17kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

The F80 S roof awning integrates seamlessly into the vehicle, with its greatly reduced cross section, this awning adapts even better to the shape of the vehicle. Assembly is done on the roof of the vehicle, this requires assembly adapters (Not Included). Optionally, the awning can be equipped with a 12V motor. The awning can also be expanded with suitable fronts and sides.

Dimensions: 370x358x250cm.      Weight: 32kg.

CHECK AVAILABILITY

FREE PLACEMENT IN STORE