12 V electric awning for maximum comfort and safety, easily actuated by pressing the wall button. Manual opening in case of emergency. The self-supporting arms are reinforced thanks to the innovative and solid double block duralumin block that does not require the use of vertical supports. The angle of inclination of the arms is fixed at 10 degrees, but it can be varied according to the height of the vehicle from 5 ° to 17 °, to allow the correct flow of water.

Dimensions: 370x335x250cm.    Weight: 34kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

The classic and compact wall installation awning for PSA Vans. Specific installation brackets for PSA minivan. Also suitable for vehicles with a lifting roof. It integrates perfectly into the vehicle. The installation does not require additional gutters or operations inside the vehicle.

Dimensions: 263x247x250cm.    Weight: 19.5kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

Awning of reduced section to be able to integrate it in the gauge of the central part. Thanks to the technical solutions adopted, it has been possible to better compact the awning gauge, and the innovations introduced, such as the standard LED guide, either on the front or on the frame in addition to the 3 guides on the front, make the F80s a Ideal choice for any type of ceiling installation.

Dimensions: 400x388x250cm.    Weight: 34kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

Electronic awning 12 V to guarantee maximum comfort, it is easily actuated by pressing the wall button. Innovative wind sensor system that is automatically activated by starting the 12V motor and reclosing the awning in strong winds, preventing the awning from being damaged. Manual opening always available in case of emergency. The self-supporting arms are reinforced thanks to the innovative and solid duralumin block that does not require the use of vertical supports. The angle of inclination of the arms is fixed at 10 degrees, but it can be varied according to the height of the vehicle from 5 ° to 17 °, to allow the correct flow of water.

Dimensions: 416x385x250cm.    Weight: 36.5kg.

Housing color: Polar White or Royal Gray.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

Fiamma expansion vessel. Preset pressure to 0.9 bar, which can be increased with a compressor. Connection for 10-12mm hose.

Dimensions: H234 x W154 x D98mm

The F80 S roof awning integrates seamlessly into the vehicle, with its greatly reduced cross section, this awning adapts even better to the shape of the vehicle. Assembly is done on the roof of the vehicle, this requires assembly adapters (Not Included). Optionally, the awning can be equipped with a 12V motor. The awning can also be expanded with suitable fronts and sides.

Dimensions: 370x358x250cm.      Weight: 32kg.

CHECK AVAILABILITY

FREE PLACEMENT IN STORE

Awning with the largest frame and extra-long roller, ideal for large motorhomes. Renovated aesthetics, modern design and technical improvements make this awning increasingly functional and advanced. Ideal for motorhomes and vans. Windlass drive. Opening and closing with a crank. Optional electric motor.

Dimensions: 552x532x250cm.    Weight: 44kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

THE CLASSIC AND COMPACT WALL INSTALLATION AWNING FOR PSA VANS. Specific installation brackets for PSA minivan. Also suitable for vehicles with a lifting roof. It integrates perfectly into the vehicle. The installation does not require additional gutters or operations inside the vehicle.

Dimensions: 263x247x250cm.    Weight: 19.5kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY