DIN cutting ring connection for 8mm gas pipe, galvanized.

The F80 S roof awning integrates seamlessly into the vehicle, with its greatly reduced cross section, this awning adapts even better to the shape of the vehicle. Assembly is done on the roof of the vehicle, this requires assembly adapters (Not Included). Optionally, the awning can be equipped with a 12V motor. The awning can also be expanded with suitable fronts and sides.

Dimensions: 370x358x250cm.      Weight: 32kg.

CHECK AVAILABILITY

FREE PLACEMENT IN STORE

Xtreme gas guarantees optimum performance even at very low temperatures, gas evaporation, even at -27 degrees Celsius, Contains 97g of butane / propane mix (70/30 mix).

12 V electric awning for maximum comfort and safety, easily actuated by pressing the wall button. Manual opening in case of emergency. The self-supporting arms are reinforced thanks to the innovative and solid double block duralumin block that does not require the use of vertical supports. The angle of inclination of the arms is fixed at 10 degrees, but it can be varied according to the height of the vehicle from 5 ° to 17 °, to allow the correct flow of water.

Dimensions: 370x335x250cm.    Weight: 34kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

Contains 350g of butane / propane mixture, for torches and soldering irons. Safety valve: easy and safe connection and disconnection.

12 V electric awning for more comfort and safety, it is easily actuated by pressing the wall button. Manual opening available in case of emergency. The self-supporting arms are reinforced thanks to the innovative and solid double block duralumin block that does not require the use of vertical supports. The angle of inclination of the arms is fixed at 10 degrees, but it can be varied according to the height of the vehicle from 5 ° to 17 °, to allow the correct flow of water.

Dimensions: 420x380x250cm.    Weight: 37.5kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY