12 V electric awning for more comfort and safety, it is easily actuated by pressing the wall button. Manual opening available in case of emergency. The self-supporting arms are reinforced thanks to the innovative and solid double block duralumin block that does not require the use of vertical supports. The angle of inclination of the arms is fixed at 10 degrees, but it can be varied according to the height of the vehicle from 5 ° to 17 °, to allow the correct flow of water.

Dimensions: 420x380x250cm.    Weight: 37.5kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

Awning of reduced section to be able to integrate it in the gauge of the central part. Thanks to the technical solutions adopted, it has been possible to better compact the awning gauge, and the innovations introduced, such as the standard LED guide, either on the front or on the frame in addition to the 3 guides on the front, make the F80s a Ideal choice for any type of ceiling installation.

Dimensions: 425x412x250cm.    Weight: 35kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

12 V electric awning for maximum comfort and safety, easily actuated by pressing the wall button. Manual opening in case of emergency. The self-supporting arms are reinforced thanks to the innovative and solid double block duralumin block that does not require the use of vertical supports. The angle of inclination of the arms is fixed at 10 degrees, but it can be varied according to the height of the vehicle from 5 ° to 17 °, to allow the correct flow of water.

Dimensions: 370x335x250cm.    Weight: 34kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

The F80 S roof awning integrates seamlessly into the vehicle, with its greatly reduced cross section, this awning adapts even better to the shape of the vehicle. Assembly is done on the roof of the vehicle, this requires assembly adapters (Not Included). Optionally, the awning can be equipped with a 12V motor. The awning can also be expanded with suitable fronts and sides.

Dimensions: 370x358x250cm.      Weight: 32kg.

CHECK AVAILABILITY

FREE PLACEMENT IN STORE

Cooler with better PU insulation. Integrated legs to raise the cooler off the ground and create an additional layer of air insulation. The design with rounded corners with a modern flair and to bring the food closer to the center with the highest cooling performance.

• Lid with hermetic closure
• Noise reducing fan
• Capacity: 28L
• Insulation: PU
• Features: PU thick insulation, superior, with airtight closure with close fitting, antimicrobial lining is resistant to odor, fungus. Easy transport, modern design
• Storage capacity (+/- 1 ° C): 20⁰ below ambient temperature
• Dimensions (LxWxH): 41 x 47 x 32 cm

Thread that allows to block the ventilation grills against the wall.

Lock nut, TRIGANO.