The F80 S roof awning integrates seamlessly into the vehicle, with its greatly reduced cross section, this awning adapts even better to the shape of the vehicle. Assembly is done on the roof of the vehicle, this requires assembly adapters (Not Included). Optionally, the awning can be equipped with a 12V motor. The awning can also be expanded with suitable fronts and sides.

Dimensions: 370x358x250cm.      Weight: 32kg.

CHECK AVAILABILITY

FREE PLACEMENT IN STORE

Oval tube table bar in silver anodized aluminum. Fixing element for the sliding rail of the black table. The table can be moved by lifting and fixing it on the toothed rack.

Door latch.

Color: Gray.

For front flaps and vertical installation. Adjustable fin weight, soft closing system.

To cover Presto 2000 series plugs and switches.

HSB lift hinge for high and low cabinet doors. In the case of wall cabinets, there must be sufficient space above the cabinets. The weight of the front part of the door must not exceed 7 kg.

Interior / Exterior Velcro Tape Allows for invisible closures.

Supports up to 1,000 openings and closings.

Temperature -40ºC and + 120ºC.

Dimensions: 2.5 m roll. 25.5mm wide.

Weight: 200 Grs.

12 V electric awning for maximum comfort and safety, easily actuated by pressing the wall button. Manual opening in case of emergency. The self-supporting arms are reinforced thanks to the innovative and solid double block duralumin block that does not require the use of vertical supports. The angle of inclination of the arms is fixed at 10 degrees, but it can be varied according to the height of the vehicle from 5 ° to 17 °, to allow the correct flow of water.

Dimensions: 370x335x250cm.    Weight: 34kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY