Català
Español
English
COMPÁS VENTANA 230 / 370
55,00€
Conpás de ventana.
Distancia del centro de fijación en el marco: 25 mm
Distancia entre ejes de fijación en hoja: 20 mm.
Medidas: 23 hasta 37 cm
Cantidad: Juego de 2 Uds.
12 V electric awning for more comfort and safety, it is easily actuated by pressing the wall button. Manual opening available in case of emergency. The self-supporting arms are reinforced thanks to the innovative and solid double block duralumin block that does not require the use of vertical supports. The angle of inclination of the arms is fixed at 10 degrees, but it can be varied according to the height of the vehicle from 5 ° to 17 °, to allow the correct flow of water.
Dimensions: 420x380x250cm. Weight: 37.5kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: Available on backorder
Motor on the right or on the left, structure in galvanized and painted in anodized aluminum.
Mesurements: 610 mm wide.
CHECK AVAILABILITY
Complete set of roll-up doors: Guide rails, shutter mat and entrance panel can be cut to desired door size and cabinet depth.
Material: Gray plastic.
Dimensions:
Shutter mat: H100xW60cm.
Guide rails: L100cm.
Retractable panel: L100cm.
HSB lift hinge for high and low cabinet doors. In the case of wall cabinets, there must be sufficient space above the cabinets. The weight of the front part of the door must not exceed 7 kg.
The removable frame is supplied complete with the removable rails. The cabinet is mounted on the right inner wall. The cabinet body must have at least internal dimensions of H47xW12xD28cm. The front of the cabinet is mounted on the shelves and can be aligned with screws.
AVAILABILITY: Out of stock
Stainless steel sink with built-in glass cover, drain hole included.
Weight: 4 Kg. Dimensions: 400X325 mm.
12 V electric awning for maximum comfort and safety, easily actuated by pressing the wall button. Manual opening in case of emergency. The self-supporting arms are reinforced thanks to the innovative and solid double block duralumin block that does not require the use of vertical supports. The angle of inclination of the arms is fixed at 10 degrees, but it can be varied according to the height of the vehicle from 5 ° to 17 °, to allow the correct flow of water.
Dimensions: 370x335x250cm. Weight: 34kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: Available on backorder
For front flaps and vertical installation. Adjustable fin weight, soft closing system.
AVAILABILITY: 25 in stock