English
Español
Català
COMPÁS DE VENTANA 215 / 335 mm Especial ADRIÁ
89,00€
Compás de ventana. Especial Adriá
Medidas: 21,5 a 33,5 cm.
Cantidad: Juego de 2 Uds.
AVAILABILITY: Out of stock
Blackout / Mosquito net pre-assembled and adapted to the existing window.
Optimal darkening thanks to honeycomb material, excellent thermal insulation.
Insect repellent. Wide field of vision thanks to the use of thin profiles.
Measurements: 500X350 mm
Color: Beige.
AVAILABILITY: 2 in stock
Complete set of roll-up doors: Guide rails, shutter mat and entrance panel can be cut to desired door size and cabinet depth.
Material: Gray plastic.
Dimensions:
Shutter mat: H100xW60cm.
Guide rails: L100cm.
Retractable panel: L100cm.
The removable frame is supplied complete with the removable rails. The cabinet is mounted on the right inner wall. The cabinet body must have at least internal dimensions of H47xW12xD28cm. The front of the cabinet is mounted on the shelves and can be aligned with screws.
AVAILABILITY: Out of stock
HSB lift hinge for high and low cabinet doors. In the case of wall cabinets, there must be sufficient space above the cabinets. The weight of the front part of the door must not exceed 7 kg.
12 V electric awning for maximum comfort and safety, easily actuated by pressing the wall button. Manual opening in case of emergency. The self-supporting arms are reinforced thanks to the innovative and solid double block duralumin block that does not require the use of vertical supports. The angle of inclination of the arms is fixed at 10 degrees, but it can be varied according to the height of the vehicle from 5 ° to 17 °, to allow the correct flow of water.
Dimensions: 370x335x250cm. Weight: 34kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: Available on backorder
Steel tube table columns: For freestanding tables with removable column. Easy to store, tilt and wobble proof. The tabletop can be included in the sleeping surface. 70 cm high tubular steel table column, Ø approx. 60mm chrome.
AVAILABILITY: 3 in stock
The F80 S roof awning integrates seamlessly into the vehicle, with its greatly reduced cross section, this awning adapts even better to the shape of the vehicle. Assembly is done on the roof of the vehicle, this requires assembly adapters (Not Included). Optionally, the awning can be equipped with a 12V motor. The awning can also be expanded with suitable fronts and sides.
Dimensions: 370x358x250cm. Weight: 32kg.
CHECK AVAILABILITY
FREE PLACEMENT IN STORE
AVAILABILITY: Available on backorder