Suitable for H2 Ducato, Jumper and Boxer vans from 2007 onwards. Quick and easy assembly, without the need for drilling. Because you can define the angle to your liking, you can open and close the awning even when the van’s sliding door is open. A self-adhesive sealing strip is included to close the gap under the awning and prevent water from entering. Only available in the Mystic Gray finish.

Dimensions: 4,00×2,50m.    Weight: 30.5kg.

CHECK AVAILABILITY 

FREE STORE ASSEMBLY

12 V electric awning for more comfort and safety, it is easily actuated by pressing the wall button. Manual opening available in case of emergency. The self-supporting arms are reinforced thanks to the innovative and solid double block duralumin block that does not require the use of vertical supports. The angle of inclination of the arms is fixed at 10 degrees, but it can be varied according to the height of the vehicle from 5 ° to 17 °, to allow the correct flow of water.

Dimensions: 420x380x250cm.    Weight: 37.5kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

Carry-Bike Fiamma for Volskwagen Crafter 2018

Bicycle rack that allows the transport of 2 bicycles and expandable up to 3 with the adapter. Suitable for a double hatchback vehicle.

Sturdy stainless steel frame. Installation taking advantage of the coupling points on the vehicle as standard.

The gate can be opened even with the bike rack installed.

NOT SUITABLE FOR VEHICLES WITH 270º OPENING HINGE SYSTEM

Measurements: 1.37 cm long / 65 cm unfolded depth / 1.16 cm high / 34 cm. depth collected.

CHECK AVAILABILITY

ASSEMBLY INCLUDED IN STORE

Awning up to 2.50 m out to expand the space and protect from the sun and rain. Quick locking system, easy to use, which simplifies the positioning and adjustment of the support legs. Because you can define the angle to your liking, you can open and close the awning even when the van’s sliding door is open. Front profile with drainage system to drain water and dirt, which makes cleaning easier.

Dimensions: 5.00×2.50cm.    Weight: 35.60kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

Awning of reduced section to be able to integrate it in the gauge of the central part. Thanks to the technical solutions adopted, it has been possible to better compact the awning gauge, and the innovations introduced, such as the standard LED guide, either on the front or on the frame in addition to the 3 guides on the front, make the F80s a Ideal choice for any type of ceiling installation.

Dimensions: 400x388x250cm.    Weight: 34kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

The F80 S roof awning integrates seamlessly into the vehicle, with its greatly reduced cross section, this awning adapts even better to the shape of the vehicle. Assembly is done on the roof of the vehicle, this requires assembly adapters (Not Included). Optionally, the awning can be equipped with a 12V motor. The awning can also be expanded with suitable fronts and sides.

Dimensions: 370x358x250cm.      Weight: 32kg.

CHECK AVAILABILITY

FREE PLACEMENT IN STORE

Awning up to 2.50 m out to expand the space and protect from the sun and rain. Quick locking system, easy to use, which simplifies the positioning and adjustment of the support legs. Since you can define the angle to your liking, you can open and close the awning even when the sliding door of the van is open. It has a front profile with a drainage system to drain water and dirt, facilitating cleaning.

Dimensions: 3,50×2,50cm.    Weight: 26,80 Kgs. 

CHECK AVAILABILITY

FREE STORE ASSEMBLY