TECHO ELEVABLE BRAM Mod. Custom L1H1
Techo Elevable de Casco en Poliéster de alta resistencia con núcleo de poliuretano
• Interior forrado con moqueta
• Lona de material marino, transpirable, impermeable*, resistente
a los rayos UV, anti moho, ligera y de fácil mantenimiento
• Ventana frontal transparente y sobrecubierta con cremallera
• Ventanas laterales con rejilla y sobrecubierta con cremallera
• Luz Interior LED y toma USB
• Cama con sistema Flex y colchón Medidas: 1900mm x 1118mm
• Base de la cama perforada y revestida con material transpirable 3D
• Altura del vehículo con el techo: 2050mm
• Acabado de la superficie en gelcoat
* En condiciones climáticas muy adversas se recomienda usar funda exterior
DISPONIBILIDAD 20 – 24 SEMANAS APROX.
Productos relacionados
- 1.629,00€
Awning with 2.75 m outlet to expand the space and protect from the sun and rain. Possibility of installing a 230 V motor with remote control. Quick locking system, easy to use, which simplifies the positioning and adjustment of the support legs. In the retractable arms there are channels to place 12 V cables, the retractable arms come with integrated extensible ones that guarantee the optimal tension of the fabric. The support legs are very easy to put on the special supports on the side wall. Front profile with drainage system to drain water and dirt, which makes cleaning easier. Dimensions: 4,50 × 2,75cm. Weight: 44.60kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock
- 1.084,00€
Its design and appearance are similar to the designs of today’s recreational vehicles and it integrates better on the sides of the vehicle. An optional rail covers the space under the awning. The rail fulfills two functions: you can install a Thule tent or add a Thule LED light. Vertical descent system to unfold the support legs without risk of damaging the vehicle. Quick locking system, easy to use, which simplifies the positioning and adjustment of the support legs. Front profile with drainage system to drain water and dirt, which also makes cleaning easier. A motor can be installed later.
Dimensions: 3,52×2,50cm. Weight: 25.40kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock
- 994,00€
Its design and appearance are similar to the designs of today’s recreational vehicles and it integrates better on the sides of the vehicle. An optional rail covers the space under the awning. The rail fulfills two functions: you can install a Thule tent or add a Thule LED light. Vertical descent system to unfold the support legs without risk of damaging the vehicle. Quick locking system, easy to use, which simplifies the positioning and adjustment of the support legs. Front profile with drainage system to drain water and dirt, which also makes cleaning easier. A motor can be installed later.
Dimensions: 3,02×2,50cm. Weight: 22.60kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock
- 441,00€
Electric step for motorhomes or vans, 44 cm wide. 12 volts, current consumption: 3 A. Aluminum non-slip step. Opening and closing by switch. The warning light indicates that the step has been extended. Fast entry and exit. Emergency manual control.
Dimensions: 470 x 485 x 79cm. Weight: 6.85kg.
AVAILABILITY: In stock
- 1.339,00€
Awning up to 2.50 m out to expand the space and protect from the sun and rain. Quick locking system, easy to use, which simplifies the positioning and adjustment of the support legs. Since you can define the angle to your liking, you can open and close the awning even when the sliding door of the van is open. Front profile with drainage system to drain water and dirt, which makes cleaning easier.
Dimensions: 4.25×2.50cm. Weight: 31,80kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock
- 819,00€
Its design and appearance are similar to the designs of today’s recreational vehicles and it integrates better on the sides of the vehicle. An optional rail covers the space under the awning. The rail fulfills two functions: you can install a Thule tent or add a Thule LED light. Vertical descent system to unfold the support legs without risk of damaging the vehicle. Quick locking system, easy to use, which simplifies the positioning and adjustment of the support legs. Front profile with drainage system to drain water and dirt, which also makes cleaning easier. A motor can be installed later.
Dimensions: 1,92×1,40m. Weight: 14.2kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock
Extra strong lightweight aluminum housing with double tubular rail. Small and narrow housing dimensions with robust aluminum end caps. Large shade surface, fabric with diffused light distribution. Vinyl fabric printed on both sides with anti-slip layer as a protective sheet. Adjustment system for closing the front panel. Auto-Lock security mechanism with self-locking. Support feet integrated into the front panel. With standard adapter kit for side panel. Housing available in Polar White or Titanium, Deluxe Gray or Blue Ocean fabric color. For awnings of 4.5 meters and 5.0 meters, an L beam is included, for awnings of more than 5.5 meters, 2 L beams. Dimensions: 552x535x250cm. Weight: 46.5kg.
CHECK AVAILABILITY
FREE PLACEMENT IN STORE
AVAILABILITY: In stock
12 V electric awning for maximum comfort and safety, easily actuated by pressing the wall button. Manual opening in case of emergency. The self-supporting arms are reinforced thanks to the innovative and solid double block duralumin block that does not require the use of vertical supports. The angle of inclination of the arms is fixed at 10 degrees, but it can be varied according to the height of the vehicle from 5 ° to 17 °, to allow the correct flow of water.
Dimensions: 370x335x250cm. Weight: 34kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock