THULE SIDE SUNSCREEN
294,00€
Translucent mesh fabric side wall for 9 series awnings. For the extraction of 3.00 m awnings. For all Thule Omnistor 9 Series awnings, sun protection, with aluminum tension rod for fixing. Mounting height: 245 – 264 cm.
CHECK AVAILABILITY
Related products
12 V electric awning for maximum comfort and safety, easily actuated by pressing the wall button. Manual opening in case of emergency. The self-supporting arms are reinforced thanks to the innovative and solid double block duralumin block that does not require the use of vertical supports. The angle of inclination of the arms is fixed at 10 degrees, but it can be varied according to the height of the vehicle from 5 ° to 17 °, to allow the correct flow of water.
Dimensions: 370x335x250cm. Weight: 34kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock
- 8,30€
Jockey Wheel Dimensions: 225 x 65 x 20 mm Maximum load: 250 Kg. Weight: 2.3 Kg.
AVAILABILITY: Out of stock
- 949,00€
Its design and appearance are similar to the designs of today’s recreational vehicles and it integrates better on the sides of the vehicle. An optional rail covers the space under the awning. The rail fulfills two functions: you can install a Thule tent or add a Thule LED light. Vertical descent system to unfold the support legs without risk of damaging the vehicle. Quick locking system, easy to use, which simplifies the positioning and adjustment of the support legs. Front profile with drainage system to drain water and dirt, which also makes cleaning easier. A motor can be installed later.
Dimensions: 2,62×2,00cm. Weight: 19kg
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock
Awning of reduced section to be able to integrate it in the gauge of the central part. Thanks to the technical solutions adopted, it has been possible to better compact the awning gauge, and the innovations introduced, such as the standard LED guide, either on the front or on the frame in addition to the 3 guides on the front, make the F80s a Ideal choice for any type of ceiling installation.
Dimensions: 450x431x250cm. Weight: 36.5kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock
Awning of reduced section to be able to integrate it in the gauge of the central part. Thanks to the technical solutions adopted, it has been possible to better compact the awning gauge, and the innovations introduced, such as the standard LED guide, either on the front or on the frame in addition to the 3 guides on the front, make the F80s a Ideal choice for any type of ceiling installation.
Dimensions: 400x388x250cm. Weight: 34kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock
- 849,00€
Its design and appearance are similar to the designs of today’s recreational vehicles and it integrates better on the sides of the vehicle. An optional rail covers the space under the awning. The rail fulfills two functions: you can install a Thule tent or add a Thule LED light. Vertical descent system to unfold the support legs without risk of damaging the vehicle. Quick locking system, easy to use, which simplifies the positioning and adjustment of the support legs. Front profile with drainage system to drain water and dirt, which also makes cleaning easier. A motor can be installed later.
Dimensions: 2,32×1,80cm. Weight: 17kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock
- 2.060,00€
Suitable for H2 Ducato, Jumper and Boxer vans from 2007 onwards. Quick and easy assembly, without the need for drilling. Because you can define the angle to your liking, you can open and close the awning even when the van’s sliding door is open. A self-adhesive sealing strip is included to close the gap under the awning and prevent water from entering. Only available in the Mystic Gray finish.
Dimensions: 4,00×2,50m. Weight: 30.5kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock
683,00€Original price was: 683,00€.546,40€Current price is: 546,40€.Carry-Bike Fiamma for Volskwagen Crafter 2018
Bicycle rack that allows the transport of 2 bicycles and expandable up to 3 with the adapter. Suitable for a double hatchback vehicle.
Sturdy stainless steel frame. Installation taking advantage of the coupling points on the vehicle as standard.
The gate can be opened even with the bike rack installed.
NOT SUITABLE FOR VEHICLES WITH 270º OPENING HINGE SYSTEM
Measurements: 1.37 cm long / 65 cm unfolded depth / 1.16 cm high / 34 cm. depth collected.
CHECK AVAILABILITY
ASSEMBLY INCLUDED IN STORE
AVAILABILITY: In stock