THULE SIDE SUNSCREEN
294,00€
Translucent mesh fabric side wall for 9 series awnings. For the extraction of 3.00 m awnings. For all Thule Omnistor 9 Series awnings, sun protection, with aluminum tension rod for fixing. Mounting height: 245 – 264 cm.
CHECK AVAILABILITY
Related products
Awning of reduced section to be able to integrate it in the gauge of the central part. Thanks to the technical solutions adopted, it has been possible to better compact the awning gauge, and the innovations introduced, such as the standard LED guide, either on the front or on the frame in addition to the 3 guides on the front, make the F80s a Ideal choice for any type of ceiling installation.
Dimensions: 425x412x250cm. Weight: 35kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock
Awning of reduced section to be able to integrate it in the gauge of the central part. Thanks to the technical solutions adopted, it has been possible to better compact the awning gauge, and the innovations introduced, such as the standard LED guide, either on the front or on the frame in addition to the 3 guides on the front, make the F80s a Ideal choice for any type of ceiling installation.
Dimensions: 370x358x250cm. Weight: 32kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock
- 1.519,00€
Its design and appearance are similar to the designs of today’s recreational vehicles and it integrates better on the sides of the vehicle. A 12 V motor with manual mechanism allows the awning to be opened without any effort. Control is exercised with a switch via a tactile command. Weighing an additional 1 kg and an additional 3 cm in length compared to a manual awning. Solid spring arms ensure that the awning fabric is perfectly taut and increases wind resistance. An optional rail covers the space under the awning. The rail fulfills two functions: you can install a Thule store or add Thule LED Strip. It has a quick locking system that is easy to use, which simplifies the positioning and adjustment of the support legs. Its front profile with drainage system allows water and dirt to be drained, facilitating cleaning.
Dimensions: 4.05 × 2.50cm. Weight: 29kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock
- 994,00€
Its design and appearance are similar to the designs of today’s recreational vehicles and it integrates better on the sides of the vehicle. An optional rail covers the space under the awning. The rail fulfills two functions: you can install a Thule tent or add a Thule LED light. Vertical descent system to unfold the support legs without risk of damaging the vehicle. Quick locking system, easy to use, which simplifies the positioning and adjustment of the support legs. Front profile with drainage system to drain water and dirt, which also makes cleaning easier. A motor can be installed later.
Dimensions: 3,02×2,50cm. Weight: 22.60kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock
- 1.339,00€
Awning up to 2.50 m out to expand the space and protect from the sun and rain. Quick locking system, easy to use, which simplifies the positioning and adjustment of the support legs. Since you can define the angle to your liking, you can open and close the awning even when the sliding door of the van is open. Front profile with drainage system to drain water and dirt, which makes cleaning easier.
Dimensions: 4.25×2.50cm. Weight: 31,80kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock
- 928,00€
The classic and compact wall installation awning for PSA Vans. Specific installation brackets for PSA minivan. Also suitable for vehicles with a lifting roof. It integrates perfectly into the vehicle. The installation does not require additional gutters or operations inside the vehicle.
Dimensions: 263x247x250cm. Weight: 19.5kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock
- 1.629,00€
Awning with 2.75 m outlet to expand the space and protect from the sun and rain. Possibility of installing a 230 V motor with remote control. Quick locking system, easy to use, which simplifies the positioning and adjustment of the support legs. In the retractable arms there are channels to place 12 V cables, the retractable arms come with integrated extensible ones that guarantee the optimal tension of the fabric. The support legs are very easy to put on the special supports on the side wall. Front profile with drainage system to drain water and dirt, which makes cleaning easier. Dimensions: 4,50 × 2,75cm. Weight: 44.60kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: In stock
683,00€546,40€Carry-Bike Fiamma for Volskwagen Crafter 2018
Bicycle rack that allows the transport of 2 bicycles and expandable up to 3 with the adapter. Suitable for a double hatchback vehicle.
Sturdy stainless steel frame. Installation taking advantage of the coupling points on the vehicle as standard.
The gate can be opened even with the bike rack installed.
NOT SUITABLE FOR VEHICLES WITH 270º OPENING HINGE SYSTEM
Measurements: 1.37 cm long / 65 cm unfolded depth / 1.16 cm high / 34 cm. depth collected.
CHECK AVAILABILITY
ASSEMBLY INCLUDED IN STORE
AVAILABILITY: In stock