Blackout / Mosquito net pre-assembled and adapted to the existing window.

Optimal darkening thanks to honeycomb material, excellent thermal insulation.

Insect repellent. Wide field of vision thanks to the use of thin profiles.

Measurements: 500X350 mm

Color: Beige.

The F80 S roof awning integrates seamlessly into the vehicle, with its greatly reduced cross section, this awning adapts even better to the shape of the vehicle. Assembly is done on the roof of the vehicle, this requires assembly adapters (Not Included). Optionally, the awning can be equipped with a 12V motor. The awning can also be expanded with suitable fronts and sides.

Dimensions: 370x358x250cm.      Weight: 32kg.

CHECK AVAILABILITY

FREE PLACEMENT IN STORE

Awning of reduced section to be able to integrate it in the gauge of the central part. Thanks to the technical solutions adopted, it has been possible to better compact the awning gauge, and the innovations introduced, such as the standard LED guide, either on the front or on the frame in addition to the 3 guides on the front, make the F80s a Ideal choice for any type of ceiling installation.

Dimensions: 400x388x250cm.    Weight: 34kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

Interior / Exterior Velcro Tape Allows for invisible closures.

Supports up to 1,000 openings and closings.

Temperature -40ºC and + 120ºC.

Dimensions: 2.5 m roll. 25.5mm wide.

Weight: 200 Grs.

X-trem insulation does not absorb moisture. Extremely flexible (360 °). It does not squeak, it has a damping effect, it is resistant to most solvents and high temperatures, and it is largely harmless in terms of construction biology. Made from closed pore foamed polyethylene. Black self-adhesive. Plate size: approx. 100 x 200 cm. Thickness: 20mm.

CHECK AVAILABILITY

12 V electric awning for maximum comfort and safety, easily actuated by pressing the wall button. Manual opening in case of emergency. The self-supporting arms are reinforced thanks to the innovative and solid double block duralumin block that does not require the use of vertical supports. The angle of inclination of the arms is fixed at 10 degrees, but it can be varied according to the height of the vehicle from 5 ° to 17 °, to allow the correct flow of water.

Dimensions: 370x335x250cm.    Weight: 34kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

Sliding guide for tables.