Webasto hybrid heater composed of a hot water boiler and a heater.

• More storage space inside thanks to complete external heater installation
• Always 100% heat output thanks to both functions
• Indoor heating and hot water
• Very short heating times thanks to the Power-Bosst function
• High total heating power: 7 kW
• Dimensions: L423 x B148 x H162
• Boiler: L391 x B412 x H258
• Weight: 5.9 kg, Boiler: 8 kg

12 V electric awning for more comfort and safety, it is easily actuated by pressing the wall button. Manual opening available in case of emergency. The self-supporting arms are reinforced thanks to the innovative and solid double block duralumin block that does not require the use of vertical supports. The angle of inclination of the arms is fixed at 10 degrees, but it can be varied according to the height of the vehicle from 5 ° to 17 °, to allow the correct flow of water.

Dimensions: 420x380x250cm.    Weight: 37.5kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

Auxiliary heating with heating capacity of 2.2 Kw of reduced dimensions. Integrated height adjustment that allows up to 3,000 m. Continuous heating power control with the lowest level. Allows silent and constant night operation. Acoustically optimized dosing pump. Ideal for compact vehicles, vans, motorhomes and small motorhomes, as well as additional heating.

DIMENSIONS: B310 x B115 X H122 mm
Weight: 2.7 kg.
WORKSHOP INSTALLATION IS RECOMMENDED

The new F65L more elegant, compact and robust. The new reinforced cover, available together with the new side covers, make the new modern F65L to better fit the line of current vehicles. The front cover is predisposed to quickly install the LED lights.

Dimensions: 490x470x250cm.    Weight: 44.5kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

• Ideal heating for VW Bus / VW Caddy / T4 / T5 / T6
• Low fuel and energy consumption
• Automatic regulation of room temperature with temperature preselection.
• Silent night operation
• Fast heating thanks to the powerful power stage.
• Avoid formation of condensation water
• Workshop installation recommended

The F80 S roof awning integrates seamlessly into the vehicle, with its greatly reduced cross section, this awning adapts even better to the shape of the vehicle. Assembly is done on the roof of the vehicle, this requires assembly adapters (Not Included). Optionally, the awning can be equipped with a 12V motor. The awning can also be expanded with suitable fronts and sides.

Dimensions: 370x358x250cm.      Weight: 32kg.

CHECK AVAILABILITY

FREE PLACEMENT IN STORE

Awning of reduced section to be able to integrate it in the gauge of the central part. Thanks to the technical solutions adopted, it has been possible to better compact the awning gauge, and the innovations introduced, such as the standard LED guide, either on the front or on the frame in addition to the 3 guides on the front, make the F80s a Ideal choice for any type of ceiling installation.

Dimensions: 425x412x250cm.    Weight: 35kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY