English
Español
Català
LLAVE DE CORTE DE BATERÍA 100A
9,95€
Llave de corte de batería de 100A.
Seccionador de baterías para 12/24 voltios con llave extraíble. Para separar dos baterías, como interruptor principal y como dispositivo de seguridad del vehículo contra robos. Muy útil para prevenir cortocircuitos. El interruptor de desconexión de la batería significa que no es necesario desconectar la batería durante tiempos de inactividad prolongados.
Capacidad de carga: 100A continuo, 500A a corto plazo (5 segundos)
Voltaje: 12/24 V
Consumo de corriente A: 100 A
consumo de energía máx.: 500 A
c12-24Volor: Negro/Rojo
Out of stock
BÜTTNER ELEKTRONIK LiFePO4 on-board batteries are characterized by their high storage capacity, low weight and high cycle stability. The batteries are internally controlled by a BMS battery management system. The battery housing of the MT-Li 95 has been adapted to the usual dimensions. In this way, it is possible to install this battery in an existing standard mounting and, thanks to the round poles also used, the already assembled cables can be easily placed. With the MT-Li 110, cables can be screwed directly, but it is also possible to screw round posts later.
Dimensions: (LxWxH) 353x175x190mm.
Weight: 13kg.
CHECK AVAILABILITY
AVAILABILITY: Available on backorder
Lead crystal battery® 115 AH, 110 AH for 5 hours and 88 AH for 2 hours. The posts have M8 threaded sleeves, which can be covered with ring grommets.
Dimensions: (LxWxH) 331x176x214mm. Weight: 34kg.
CHECK AVAILABILITY
AVAILABILITY: Available on backorder
AVAILABILITY: 2 in stock
Due to the low weight, compact dimensions, increased current and long service life, combined with particularly low self-discharge, these LiFePO4 batteries are ideal for use in motorhomes, caravans and all other recreational and expedition vehicles.
Dimensions: (LxWxH) 195x165x180mm.
Weight: 7.2kg.
CHECK AVAILABILITY
AVAILABILITY: Available on backorder
Lithium iron phosphate battery system. Power supply like never before. Light, compact and safe Super-B lithium battery system with BMS. The system can be charged with standard AGM or gel battery chargers. Ideal to replace standard batteries. High discharge current: The battery can discharge in 20 minutes without damage, but a discharge of 100% is not a problem for a short period of time. Charges 3-10 times as fast as possible. The battery can be charged in just 1 hour. In this way, the battery is protected against undervoltage and overvoltage.
Dimensions: (LxWxH) 414x225x313mm.
Weight: 28.3kg.
CHECK AVAILABILITY
Powerful charge converter with microprocessor controlled characteristic curve for better battery charging on the go. Compensates for voltage losses with long cable runs and / or small sections. Suitable for the latest generation of acid, gel, AGM and lithium batteries. Supplied with temperature sensor.
AVAILABILITY: Out of stock
Equipped with a special microfiber in the proven AGM version, battery provides even more capacity with the same dimensions. Ensures an even longer power supply.
Dimensions: L353 x W175 x H190mm. Weight: 27.1kg.
CHECK AVAILABILITY
AVAILABILITY: Available on backorder