English
Español
Català
INVERSOR + CARGADOR + INTERRUP. PRIORITARIO CARBEST 1500W
589,00€
Inversor de 1500w que incluye cargador de 10A e interruptor prioritario.
Circuito de prioridad de red de 230 voltios integrado:
Tan pronto como esté disponible la corriente de 230 voltios (por ejemplo, del camping), el funcionamiento del inversor se interrumpe automáticamente. El funcionamiento del inversor se reanuda inmediatamente en cuanto deja de haber corriente exterior.
Cargador de baterías integrado de 3 etapas para baterías de gel y AGM con 15 A.
Cable de repuesto/extensión:
- ± 25 mm², 2 x 200 cm Art.-.No. 81940 (Con 2 anillas preensambladas)
- ± 50 mm², 2 x 200 cm art. no. 81941 (Con 2 anillas preensambladas)
- Cable mando a distancia (como repuesto) art. no. 81946
| Voltaje de entrada | 12V | ||
| Voltaje de salida | 230V | ||
| Potencia nominal | 1500W | ||
| Potencia máxima | 3000W | ||
| Umbral de apagado | 10.5V | ||
| tiempo de conmutación | 10ms | ||
| Consumo en espera (A) | 0.75Ah | ||
| cargador de batería | 15A | ||
| enchufes | 2 | ||
| Longitud en mm | 400mm | ||
| Ancho en mm | 230mm | ||
| Altura en mm | 110mm | ||
| Peso en kilogramos | 3.6kg |
Absolutely maintenance free, long life. Rechargeable after deep discharge. 80/90 Ah solar battery operating capacity.
Dimensions: (LxWxH) 353x175x190mm.
Weight: 26.8kg.
CHECK AVAILABILITY
AVAILABILITY: Available on backorder
AVAILABILITY: 3 in stock
BÜTTNER ELEKTRONIK LiFePO4 on-board batteries are characterized by their high storage capacity, low weight and high cycle stability. The batteries are internally controlled by a BMS battery management system. The battery housing of the MT-Li 95 has been adapted to the usual dimensions. In this way, it is possible to install this battery in an existing standard mounting and, thanks to the round poles also used, the already assembled cables can be easily placed. With the MT-Li 110, cables can be screwed directly, but it is also possible to screw round posts later.
Dimensions: (LxWxH) 353x175x190mm.
Weight: 13kg.
CHECK AVAILABILITY
AVAILABILITY: Available on backorder
Green Power AGM batteries were specially developed as service batteries. They combine good cycle stability, low self-discharge, high energy density, and good cold start ability. So AGM batteries are now also used by some car manufacturers as starter batteries.
Dimensions: (LxWxH) 522x238x236mm.
Weight: 47kg
CHECK AVAILABILITY
AVAILABILITY: Available on backorder
Powerful charge converter with microprocessor controlled characteristic curve for better battery charging on the go. Compensates for voltage losses with long cable runs and / or small sections. Suitable for the latest generation of acid, gel, AGM and lithium batteries. Supplied with temperature sensor.
AVAILABILITY: Out of stock
Due to the low weight, compact dimensions, increased current and long service life, combined with particularly low self-discharge, these LiFePO4 batteries are ideal for use in motorhomes, caravans and all other recreational and expedition vehicles.
Dimensions: (LxWxH) 195x165x180mm.
Weight: 7.2kg.
CHECK AVAILABILITY
AVAILABILITY: Available on backorder
Lithium iron phosphate battery system. Power supply like never before. Light, compact and safe Super-B lithium battery system with BMS. The system can be charged with standard AGM or gel battery chargers. Ideal to replace standard batteries. High discharge current: The battery can discharge in 20 minutes without damage, but a discharge of 100% is not a problem for a short period of time. Charges 3-10 times as fast as possible. The battery can be charged in just 1 hour. In this way, the battery is protected against undervoltage and overvoltage.
Dimensions: (LxWxH) 414x225x313mm.
Weight: 28.3kg.
CHECK AVAILABILITY
VARTA AGM 12v and 150Ah battery, 5 to 6 times cycle stability.
Maintenance free. Suitable for Dual Power. For startup and commissioning.
Quickly rechargeable. Extremely safe to use. Durable and robust.
Dimensions: L484 x H171 x H241 mm. Weight: 45.5kg.
CHECK AVAILABILITY
AVAILABILITY: Available on backorder