The F80 S roof awning integrates seamlessly into the vehicle, with its greatly reduced cross section, this awning adapts even better to the shape of the vehicle. Assembly is done on the roof of the vehicle, this requires assembly adapters (Not Included). Optionally, the awning can be equipped with a 12V motor. The awning can also be expanded with suitable fronts and sides.

Dimensions: 370x358x250cm.      Weight: 32kg.

CHECK AVAILABILITY

FREE PLACEMENT IN STORE

UV-resistant roof covering in 40x40cm format, with high-quality pleated blind with magnetic closure, blackout and mosquito protection, for roof thicknesses of 25-50 mm.

Manual step, opening and closing from the outside.

Measurements: 44cm wide.    Weight: 4.12 kg.

Awning of reduced section to be able to integrate it in the gauge of the central part. Thanks to the technical solutions adopted, it has been possible to better compact the awning gauge, and the innovations introduced, such as the standard LED guide, either on the front or on the frame in addition to the 3 guides on the front, make the F80s a Ideal choice for any type of ceiling installation.

Dimensions: 400x388x250cm.    Weight: 34kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

Motor on the right or on the left, structure in galvanized and painted in anodized aluminum.
Mesurements: 610 mm wide.

CHECK AVAILABILITY

With mosquito net and blackout blind. Aluminum coated top reflects solar radiation, protection against black fly plissee. The large glass overhang provides protection from the rain. Convenient installation of the dome with a single bracket. Roof thickness 23-42 mm.

Cutting dimension: 280 x 280 mm.

Free passage light measurement: 238 x 186 mm.

External dimension: 408 x 370 mm.

Outside interior dimension of the frame: 312 x 312 mm.

Inner frame depth: 75mm.

Height above ceiling: 99 mm.

12 V electric awning for maximum comfort and safety, easily actuated by pressing the wall button. Manual opening in case of emergency. The self-supporting arms are reinforced thanks to the innovative and solid double block duralumin block that does not require the use of vertical supports. The angle of inclination of the arms is fixed at 10 degrees, but it can be varied according to the height of the vehicle from 5 ° to 17 °, to allow the correct flow of water.

Dimensions: 370x335x250cm.    Weight: 34kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY