English
Español
Català
COMPÁS VENTANA 255 / 405 mm
86,00€
Compás ventana de 255 / 405 mm.
Distancia del centro entre la fijación en la hoja: 29 mm.
Medidas: 25,5 hasta 40,5 cm
Cantidad: Juego de 2 Uds.
The F80 S roof awning integrates seamlessly into the vehicle, with its greatly reduced cross section, this awning adapts even better to the shape of the vehicle. Assembly is done on the roof of the vehicle, this requires assembly adapters (Not Included). Optionally, the awning can be equipped with a 12V motor. The awning can also be expanded with suitable fronts and sides.
Dimensions: 370x358x250cm. Weight: 32kg.
CHECK AVAILABILITY
FREE PLACEMENT IN STORE
AVAILABILITY: Available on backorder
12 V electric awning for maximum comfort and safety, easily actuated by pressing the wall button. Manual opening in case of emergency. The self-supporting arms are reinforced thanks to the innovative and solid double block duralumin block that does not require the use of vertical supports. The angle of inclination of the arms is fixed at 10 degrees, but it can be varied according to the height of the vehicle from 5 ° to 17 °, to allow the correct flow of water.
Dimensions: 370x335x250cm. Weight: 34kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: Available on backorder
Stainless steel sink with built-in glass cover, drain hole included.
Weight: 4 Kg. Dimensions: 400X325 mm.
Silver colored plastic roller shutter door with handle at both ends. Max Height 198 cm, maximum width 100 cm, each can be cut. Blade width approx. 32 mm.
Dimensions: H198xB100cm.
Interior / Exterior Velcro Tape Allows for invisible closures.
Supports up to 1,000 openings and closings.
Temperature -40ºC and + 120ºC.
Dimensions: 2.5 m roll. 25.5mm wide.
Weight: 200 Grs.
AVAILABILITY: 1 in stock
12 V electric awning for more comfort and safety, it is easily actuated by pressing the wall button. Manual opening available in case of emergency. The self-supporting arms are reinforced thanks to the innovative and solid double block duralumin block that does not require the use of vertical supports. The angle of inclination of the arms is fixed at 10 degrees, but it can be varied according to the height of the vehicle from 5 ° to 17 °, to allow the correct flow of water.
Dimensions: 420x380x250cm. Weight: 37.5kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
AVAILABILITY: Available on backorder
AVAILABILITY: Out of stock
AVAILABILITY: 20 in stock