Electric step for motorhomes or vans, 44 cm wide. 12 volts, current consumption: 3 A. Aluminum non-slip step. Opening and closing by switch. The warning light indicates that the step has been extended. Fast entry and exit. Emergency manual control.

Dimensions: 470 x 485 x 79cm. Weight: 6.85kg.

12 V electric awning for maximum comfort and safety, easily actuated by pressing the wall button. Manual opening in case of emergency. The self-supporting arms are reinforced thanks to the innovative and solid double block duralumin block that does not require the use of vertical supports. The angle of inclination of the arms is fixed at 10 degrees, but it can be varied according to the height of the vehicle from 5 ° to 17 °, to allow the correct flow of water.

Dimensions: 370x335x250cm.    Weight: 34kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

12 V electric awning for more comfort and safety, it is easily actuated by pressing the wall button. Manual opening available in case of emergency. The self-supporting arms are reinforced thanks to the innovative and solid double block duralumin block that does not require the use of vertical supports. The angle of inclination of the arms is fixed at 10 degrees, but it can be varied according to the height of the vehicle from 5 ° to 17 °, to allow the correct flow of water.

Dimensions: 420x380x250cm.    Weight: 37.5kg.

CHECK AVAILABILITY

FREE STORE ASSEMBLY

Manual step, opening and closing from the outside.

Measurements: 44cm wide.    Weight: 4.12 kg.

Electric step, with automatic switch. Order separately.

Weight: 6.7kg.   Dimensions: B700mm.

Webasto hybrid heater composed of a hot water boiler and a heater.

• More storage space inside thanks to complete external heater installation
• Always 100% heat output thanks to both functions
• Indoor heating and hot water
• Very short heating times thanks to the Power-Bosst function
• High total heating power: 7 kW
• Dimensions: L423 x B148 x H162
• Boiler: L391 x B412 x H258
• Weight: 5.9 kg, Boiler: 8 kg

The F80 S roof awning integrates seamlessly into the vehicle, with its greatly reduced cross section, this awning adapts even better to the shape of the vehicle. Assembly is done on the roof of the vehicle, this requires assembly adapters (Not Included). Optionally, the awning can be equipped with a 12V motor. The awning can also be expanded with suitable fronts and sides.

Dimensions: 370x358x250cm.      Weight: 32kg.

CHECK AVAILABILITY

FREE PLACEMENT IN STORE