CARGADOR DOMETIC IU812
127,50€
Tecnología de carga óptima para baterías AGM, GEL y de ácido de 12 voltios.
Datos técnicos
Voltaje de entrada: 230 voltios CC. Rango de tensión de entrada: 180 – 253 voltios CA / 50 – 60 Hz Tensión nominal de la batería: 12 voltios CC. Tensión de carga final: 14,4 voltios CC. Voltaje de carga lenta: 13,6 voltios CC. Capacidad máxima de la batería: 100 Ah. Corriente de carga máx.: 8 A. Temperatura de funcionamiento: 0 °C a +50 °C.
Tensión de entrada: 230 V
Frecuencia: 50 Hz
Voltaje de salida: 12 V
Poder de carga: 8 Ah
Capacidad de la batería: 100 Ah
tipo de batería: agm-gel-wet
Eficiencia: 87%
Longitud en mm: 200 mm
Ancho en mm: 120 mm
Altura en mm: 90 mm
Peso en kilogramos: 0,8 kg
Related products
- 899,00€
Due to the low weight, compact dimensions, increased current and long service life, coupled with especially low self-discharge, these LiFePO4 batteries are ideal for use in mobile homes, caravans and all other leisure and expedition vehicles.
Dimensions: (LxWxH) 305x170x210mm.
Weight: 13kg.
CHECK AVAILABILITY
AVAILABILITY: In stock
AVAILABILITY: In stock
AGM 12v and 90Ah MASTERVOLT Battery.
Dimensions: (LxWxH) 330x173x212mm. Weight: 28kg.
CHECK AVAILABILITY
AVAILABILITY: In stock
Due to the low weight, compact dimensions, increased current and long service life, combined with particularly low self-discharge, these LiFePO4 batteries are ideal for use in motorhomes, caravans and all other recreational and expedition vehicles.
Dimensions: (LxWxH) 195x165x180mm.
Weight: 7.2kg.
CHECK AVAILABILITY
AVAILABILITY: In stock
BÜTTNER ELEKTRONIK LiFePO4 on-board batteries are characterized by their high storage capacity, low weight and high cycle stability. The batteries are internally controlled by a BMS battery management system. The battery housing of the MT-Li 95 has been adapted to the usual dimensions. In this way, it is possible to install this battery in an existing standard mounting and, thanks to the round poles also used, the already assembled cables can be easily placed. With the MT-Li 110, cables can be screwed directly, but it is also possible to screw round posts later.
Dimensions: (LxWxH) 353x175x190mm.
Weight: 13kg.
CHECK AVAILABILITY
AVAILABILITY: In stock
- 652,13€
The SinePower sine wave inverter generates an alternating voltage of 230 volts from a battery voltage of 12 volts. This ensures trouble-free and mobile operation even for highly sensitive 230 V consumers (eg computers, PAD machines, electric toothbrushes, etc.). It generates very high power peaks and, therefore, a sufficient free space to be able to operate with high starting currents from the connected loads. Simple installation, compact design, light weight.
Dimensions: B197.5 x H94.3 x D376 mm.
CHECK AVAILABILITY
AVAILABILITY: Out of stock
Lithium iron phosphate battery system. Power supply like never before. Light, compact and safe Super-B lithium battery system with BMS. The system can be charged with standard AGM or gel battery chargers. Ideal to replace standard batteries. High discharge current: The battery can discharge in 20 minutes without damage, but a discharge of 100% is not a problem for a short period of time. Charges 3-10 times as fast as possible. The battery can be charged in just 1 hour. In this way, the battery is protected against undervoltage and overvoltage.
Dimensions: (LxWxH) 414x225x313mm.
Weight: 28.3kg.
CHECK AVAILABILITY
AVAILABILITY: In stock
- 486,42€
Powerful charge converter with microprocessor controlled characteristic curve for better battery charging on the go. Compensates for voltage losses with long cable runs and / or small sections. Suitable for the latest generation of acid, gel, AGM and lithium batteries. Supplied with temperature sensor.
AVAILABILITY: Out of stock
