English
Español
Català
CARGADOR BATERIA CBE CB510-3 10A
129,00€
Cargador de batería fijo CBE 510 – 10A (50-120 Ah)
Apto para cargar baterías de plomo – ácido y/o plomo – gel. Cuenta con sistema de protección contra los excesos de temperatura, cortocircuitos, inversión de polos.
- Tensión nominal: 230 V CA +/- 10%.
- Frecuencia: 50 Hz.
- Potencia máxima: 150 W.
- Fusible de protección: 2 A.
- Interruptor de seguridad: 230 V.
- Tensión Máxima: 14,3 V (Pb-Gel) / 14,1 V (Pb-Ácido).
- Tensión Mantenimiento: 13,8 V (Pb-Gel) / 13,5 V (Pb-Ácido).
- Corriente Máxima: 10 A.
- Línea de Carga: IUoU.
- Selector Tipo Batería: Pb-Ácido / Pb-Gel.
- Protección Circuito e Inversión Polaridad: 15 A.
- Protección Térmica: Sí.
- Presencia Señal de Red: 12 V 50 mA.
- Rendimiento: 86%.
- Temperatura Ambiente: 0 – 50°C.
- Ventilación: No.
- Grado de Protección: IP30.
- Tipo Conexión Red: Schuko.
- Tipo de Conexión de la Batería Faston Tipo 6,3.
- Material Carcasa: Nylon y Fibra de Vidrio.
- Medidas: 180 x 140 x 85 mm.
- Peso: 1 kg.
Out of stock
Powerful charge converter with microprocessor controlled characteristic curve for better battery charging on the go. Compensates for voltage losses with long cable runs and / or small sections. Suitable for the latest generation of acid, gel, AGM and lithium batteries. Supplied with temperature sensor.
AVAILABILITY: Out of stock
AGM 12v and 90Ah MASTERVOLT Battery.
Dimensions: (LxWxH) 330x173x212mm. Weight: 28kg.
CHECK AVAILABILITY
AVAILABILITY: Available on backorder
Due to the low weight, compact dimensions, increased current and long service life, combined with particularly low self-discharge, these LiFePO4 batteries are ideal for use in motorhomes, caravans and all other recreational and expedition vehicles.
Dimensions: (LxWxH) 195x165x180mm.
Weight: 7.2kg.
CHECK AVAILABILITY
AVAILABILITY: Available on backorder
AVAILABILITY: 1 in stock
Lithium iron phosphate battery system. Power supply like never before. Light, compact and safe Super-B lithium battery system with BMS. The system can be charged with standard AGM or gel battery chargers. Ideal to replace standard batteries. High discharge current: The battery can discharge in 20 minutes without damage, but a discharge of 100% is not a problem for a short period of time. Charges 3-10 times as fast as possible. The battery can be charged in just 1 hour. In this way, the battery is protected against undervoltage and overvoltage.
Dimensions: (LxWxH) 414x225x313mm.
Weight: 28.3kg.
CHECK AVAILABILITY
AVAILABILITY: 14 in stock
BÜTTNER ELEKTRONIK LiFePO4 on-board batteries are characterized by their high storage capacity, low weight and high cycle stability. The batteries are internally controlled by a BMS battery management system. The battery housing of the MT-Li 95 has been adapted to the usual dimensions. In this way, it is possible to install this battery in an existing standard mounting and, thanks to the round poles also used, the already assembled cables can be easily placed. With the MT-Li 110, cables can be screwed directly, but it is also possible to screw round posts later.
Dimensions: (LxWxH) 353x175x190mm.
Weight: 13kg.
CHECK AVAILABILITY
AVAILABILITY: Available on backorder
AVAILABILITY: 2 in stock