BOMBA AGUA REICH Mod. VIP-PLUS 20 L.
22,70€
Bomba de agua sumergible con conexión de tubo para manguera.
| Altura en mm: | 123 mm |
| Diámetro en milímetros: | Ø 48 mm |
| Voltaje: | 12 V |
| Consumo de corriente A: | 3.8 A |
| Consumo de energía (vatios): | 45 W |
| Caudal en litros: | 20 l/min |
| Altura de entrega en m: | 11 m |
| presión de corte (bar): | 1.1 bar |
| Presión en PSI: | 16 psi |
| vinculación: | Manguera de 10 mm |
| esencial: | plástico |
| color: | blanco |
Marca: Reich / Mod. Vip-Plus 20L.
- Cumple con el agua potable según DIN 2001-2
- Conexión con abrazadera inoxidable de manguera
- Adecuado para carreras cortas en seco
- Diámetro pequeño: adecuado para aberturas de recipientes pequeños
Todas las bombas sumergibles con marca CE, diámetro de conexión: 10 mm, funcionamiento seguro en seco durante hasta 30 minutos, lubricación permanente
Related Products
Mixing-valve mixer for hot and cold water.
AVAILABILITY: Out of stock
Flexible outlet tube, protected against dirt. Includes hood with loss protection.
Dimensions: LxWxH: 41.5 x 24.8 x 53.7 cm.
AVAILABILITY: Out of stock
Self-priming pump. Head up to 3 m. The integrated stainless steel filter protects against contamination and guarantees a long service life. Automatic pressure switch. It runs dry.
Connection 10 mm.
10L capacity.
AVAILABILITY: 2 in stock
Wide neck drum, opening diameter 90 mm.
Capacity: 22 liters.
Dimensions: 18 x 37 x 47.5 cm.
AVAILABILITY: Out of stock
Self-priming pump. Head up to 3 m. The integrated stainless steel filter protects against contamination and guarantees a long service life. Automatic pressure switch. It runs dry.
Connection 10 mm.
7L capacity.
AVAILABILITY: Out of stock
Drain valve to install between or at the end of the water pipe, allows the hose valves to be completely emptied, greatly avoiding the risk of freezing and breaking the water hose in frost conditions. ABO valves are automatic, non-current, pressure controlled drain valves. Nozzle for 10 mm hose.
AVAILABILITY: 1 in stock
Fiamma expansion vessel. Preset pressure to 0.9 bar, which can be increased with a compressor. Connection for 10-12mm hose.
Dimensions: H234 x W154 x D98mm
AVAILABILITY: 3 in stock
The pressure is preset to 1.4 bar and can be increased to a maximum of 8.6 bar.
Dimensions: Height 226 x Width 103 x Depth 95 mm.
AVAILABILITY: 2 in stock

