SELF-ADHESIVE INSULATOR 20mm
40,00€
X-trem insulation does not absorb moisture. Extremely flexible (360 °). It does not squeak, it has a damping effect, it is resistant to most solvents and high temperatures, and it is largely harmless in terms of construction biology. Made from closed pore foamed polyethylene. Black self-adhesive. Plate size: approx. 100 x 200 cm. Thickness: 20mm.
CHECK AVAILABILITY
Related Products
Interior / Exterior Velcro Tape Allows for invisible closures.
Supports up to 1,000 openings and closings.
Temperature -40ºC and + 120ºC.
Dimensions: 2.5 m roll. 25.5mm wide.
Weight: 200 Grs.
AVAILABILITY: 1 in stock
Van-Lock security locks for rear and sliding doors.
Suitable for all models of vans.
AVAILABILITY: Out of stock
Mixing-valve mixer for hot and cold water.
AVAILABILITY: Out of stock
The pressure is preset to 1.4 bar and can be increased to a maximum of 8.6 bar.
Dimensions: Height 226 x Width 103 x Depth 95 mm.
AVAILABILITY: 2 in stock
For all buses, coaches and vehicles with an exterior cladding of sheet steel. Keeps the KLappe open securely without the need for additional folding brackets. With rubber coating against scratches.
50Ah fuse holder.
Color: Black.
AVAILABILITY: 7 in stock
The removable frame is supplied complete with the removable rails. The cabinet is mounted on the right inner wall. The cabinet body must have at least internal dimensions of H47xW12xD28cm. The front of the cabinet is mounted on the shelves and can be aligned with screws.
AVAILABILITY: Out of stock
Suitable for H2 Ducato, Jumper and Boxer vans from 2007 onwards. Quick and easy assembly, without the need for drilling. Because you can define the angle to your liking, you can open and close the awning even when the van’s sliding door is open. A self-adhesive sealing strip is included to close the gap under the awning and prevent water from entering. Only available in the Mystic Gray finish.
Dimensions: 4,00×2,50m. Weight: 30.5kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY


