English
Español
Català
SELF-ADHESIVE INSULATOR 20mm
40,00€
X-trem insulation does not absorb moisture. Extremely flexible (360 °). It does not squeak, it has a damping effect, it is resistant to most solvents and high temperatures, and it is largely harmless in terms of construction biology. Made from closed pore foamed polyethylene. Black self-adhesive. Plate size: approx. 100 x 200 cm. Thickness: 20mm.
CHECK AVAILABILITY
Fiamma F35pro is the practical manual awning with legs integrated in the roller, it can be installed on any type of van thanks to the different models of supports that are attached to the walls, roof bars or guide. It can be installed with optional brackets that are attached to the vehicle wall or roof bars. The awning can also be placed directly on the caravan guide without additional supports, locking it with a security screw.
Dimensions: 253x232x225cm. Max height: 225cm. Weight: 11.5kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
HSB lift hinge for high and low cabinet doors. In the case of wall cabinets, there must be sufficient space above the cabinets. The weight of the front part of the door must not exceed 7 kg.
Steel tube table columns: For freestanding tables with removable column. Easy to store, tilt and wobble proof. The tabletop can be included in the sleeping surface. 70 cm high tubular steel table column, Ø approx. 60mm chrome.
AVAILABILITY: 3 in stock
Its design and appearance are similar to the designs of today’s recreational vehicles and it integrates better on the sides of the vehicle. An optional rail covers the space under the awning. The rail fulfills two functions: you can install a Thule tent or add a Thule LED light. Vertical descent system to unfold the support legs without risk of damaging the vehicle. Quick locking system, easy to use, which simplifies the positioning and adjustment of the support legs. Front profile with drainage system to drain water and dirt, which also makes cleaning easier. A motor can be installed later.
Dimensions: 3,02×2,50cm. Weight: 22.60kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
Suitable for H2 Ducato, Jumper and Boxer vans from 2007 onwards. Quick and easy assembly, without the need for drilling. Because you can define the angle to your liking, you can open and close the awning even when the van’s sliding door is open. A self-adhesive sealing strip is included to close the gap under the awning and prevent water from entering. Only available in the Mystic Gray finish.
Dimensions: 4,00×2,50m. Weight: 30.5kg.
CHECK AVAILABILITY
FREE STORE ASSEMBLY
For all buses, coaches and vehicles with an exterior cladding of sheet steel. Keeps the KLappe open securely without the need for additional folding brackets. With rubber coating against scratches.