English
Español
Català
INVERTER 12v / 230v 1000w VECHLINE
370,00€
- Output wave of: pure sine wave
- Nominal input voltage: 12vDC (10-16v)
- Nominal output voltage: 230vAC +/- 5%
- Output Power (continuous watts): 1000w
- Output power (peak watts): 2000w
- Frequency: 50Hz +/- 2Hz
- Standby power: <0.75A
- Efficiency:> 90%
- Fan cooling
- Remote control
- DC input harness: cable + connectors
- DC input cable (length / section): 16mm2 / 80cmx2
- On / off switch: illuminated on / off
- Power / Fault LED
- External fuses: 4x35A
- French standard AC outlet socket: x1
- Screwed base
- USB 5vDC 2100A output: x1
- Weight (kg): 3,2
- Dimensions cm (L x L x H): 31x15x7
Absolutely maintenance free, long life. Rechargeable after deep discharge. 80/90 Ah solar battery operating capacity.
Dimensions: (LxWxH) 353x175x190mm.
Weight: 26.8kg.
CHECK AVAILABILITY
AVAILABILITY: Available on backorder
Equipped with a special microfiber in the proven AGM version, battery provides even more capacity with the same dimensions. Ensures an even longer power supply.
Dimensions: L353 x W175 x H190mm. Weight: 27.1kg.
CHECK AVAILABILITY
AVAILABILITY: Available on backorder
Lithium iron phosphate battery system. Power supply like never before. Light, compact and safe Super-B lithium battery system with BMS. The system can be charged with standard AGM or gel battery chargers. Ideal to replace standard batteries. High discharge current: The battery can discharge in 20 minutes without damage, but a discharge of 100% is not a problem for a short period of time. Charges 3-10 times as fast as possible. The battery can be charged in just 1 hour. In this way, the battery is protected against undervoltage and overvoltage.
Dimensions: (LxWxH) 414x225x313mm.
Weight: 28.3kg.
CHECK AVAILABILITY
AVAILABILITY: 2 in stock
AVAILABILITY: 6 in stock
BÜTTNER ELEKTRONIK LiFePO4 on-board batteries are characterized by their high storage capacity, low weight and high cycle stability. The batteries are internally controlled by a BMS battery management system. The battery housing of the MT-Li 95 has been adapted to the usual dimensions. In this way, it is possible to install this battery in an existing standard mounting and, thanks to the round poles also used, the already assembled cables can be easily placed. With the MT-Li 110, cables can be screwed directly, but it is also possible to screw round posts later.
Dimensions: (LxWxH) 353x175x190mm.
Weight: 13kg.
CHECK AVAILABILITY
AVAILABILITY: Available on backorder
AVAILABILITY: 14 in stock